|
Technical Forum The main forum for jeep related discussions. Mechanically Inept... |
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
One upper link on the front.
I was wondering what would be the preferred way to run one upper link.
1. RE style radius arm vs. separate upper link to the frame? 2. On driver side to the stock cast mount on the diff vs. pass. side to a reinforced stock mount? I would inclined to run one on the driver side due to better exhaust clearance and it seems to me that cast mount would be stronger. |
#2
|
|||
|
|||
That's exactly what I'm starting on my jeep (1 upper pass side).
Drew from Polyperformance was very helpful. I am rerouting my exhaust so the link will fit. All 3 front arms will be the same length. I'm shooting for AS in the 60-80% range. Joel
__________________
Jeeps are built not bought. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Running a three link with a Dana 30 front and the cast pumkin mount? | chadjans | Jeep Friends Forum | 2 | 06-21-2003 02:50 PM |
For Sale - NAPA / Dana Dana 30 front upper 2.0* adjustable ball joints | chadjans | Buy/Sell Jeep Stuff | 0 | 06-23-2002 01:57 AM |
9 inch instal and upper 4 link mods | Chris L | Jeep Friends Forum | 12 | 06-06-2002 11:50 AM |
Need one front stock upper control arm... | Wumpy | Buy/Sell Jeep Stuff | 7 | 08-31-2001 08:03 AM |
Adjustable front upper control arms needed for flat skid? | Wumpy | Jeep Friends Forum | 2 | 06-07-2001 08:43 PM |