Air Raid type intake needed

[Matt Pascoe]

I know its a longshot...

Most people were disapointed with this product and some swapped back to the stock air box. Any chance one of you guys might have one collecting dust?

I have an interference problem under the hood and one of these air tubes might solve my problem.

Looking for one cheap to experiment with.

[NAILER341]

Originally posted by Matt Pascoe
I know its a longshot...

Most people were disapointed with this product and some swapped back to the stock air box. Any chance one of you guys might have one collecting dust?

I have an interference problem under the hood and one of these air tubes might solve my problem.

Looking for one cheap to experiment with.

i am kind of in the same boat, matt. have a look at auto zone if all you need is the tube.

[Matt Pascoe]

Thanks Erik, I kinda rememer seeing a wall of ricer intake mods last time I was there. Probably a good bet I could make one fit

[John]

That and a PVC elbow are what make up my air intake. Works just fine

[PK99TJ]

The one I made was just a chopped 4.0L tube. I might still have mine somewhere, I'll have a look. I removed it...

[NAILER341]

here are a couple of pics of my clearance solution. most of it is blaines idea, but i got it to fit in there.

[Jerry Bransford]

Nailer, that air intake is cool but how do you pass the visual inspection part of the Calif. smog test without a CARB sticker? Or does it have a CARB sticker?

[NAILER341]

Originally posted by Jerry Bransford
Nailer, that air intake is cool but how do you pass the visual inspection part of the Calif. smog test without a CARB sticker? Or does it have a CARB sticker?

it does have a sticker of some sort on it, jerry. it is a stock air box from a different vehicle.

i smogged it yesterday at a "test only" station yesterday right after i hooked up the charcoal canister line to it.

passed in all categories.