Help a CJ brother out...

[blkTJ]

A friend of mine posted a question on another forum... just wonedring if some of you 300 guys had any input. here's the question...

D300 4 to 1 gears

--------------------------------------------------------------------------------

Well, I'm finally getting around to going through my D300. I ordered the 4 to 1 kit from JB Conversions. Unfortunately, he is out of the rotation plates so I guess I'm going with an Advance Adapters or one of the cheesy deals off ebay that keep the original input shaft. Haven't decided yet. The AA kit is ~$200, and the cheesy deals are ~$70. Anyone have experience with the clocking rings that don't replace the input shaft? Any problems with spline engagement? The cheapos are basically a plate that bolts to the tcase with studs that thread into it to allow it to be bolted to the adapter.

thanks folks.

[ChrisO]

I've used both and even gone one step further*. There is no comparison, the input replacment is the only choice (IMO).

* Sometimes you can actually re-drill the adapter to re-clock. Check the webbing or gussetts on the trans side of the adapter to see if it will work, and if so, do it that way. The adavtange is, no parts to buy, just labor!


Email me for more input and pics.

Chris O