|
Technical Forum The main forum for jeep related discussions. Mechanically Inept... |
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
99 4.0 no start
Just did a swap, installed a 2000 4.0 in place of the 99 4.0.
New CPS, swapped TPS with the original. She cranks and pops through the intake. Almost like timing is off. I have the 2000 Cam position "thingy" in the engine now, didn't wanna touch it. Any ideas? If I disconnect the CPS, OR the Cam position sensor, I get no popping so I believe thay are both fine. Thanks in advance |
#2
|
|||
|
|||
Fixed
Changed the coil rail, Vrooom. I guess the 2000 Wrangler was either bad or different than the 99 Cherokee Larado.
|
#3
|
|||
|
|||
Re: Fixed
Quote:
__________________
I am Savvy. |
#4
|
|||
|
|||
Yes, both looked identical but after closer look, one had the plug straight down, the other had it coming out at an angle. I then looked at Rock Auto, and they listed different part numbers. WTF, same engine, Maybe because one was the Cherokee and one was the Wrangler.
|
#5
|
|||
|
|||
Quote:
__________________
I am Savvy. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil Filtering Effectiveness - Fram/Napa/Pure1/Mobil1/OilGuard | Daless2 | Jeep Friends Forum | 10 | 01-12-2005 09:29 PM |
4.0 in a cj | Japhy1 | Technical Forum | 1 | 03-10-2004 07:27 AM |
Can't start my Jeep in the cold...need advice please | purplejeep | Jeep Friends Forum | 1 | 11-30-2003 08:17 PM |
info for my commanche 4.0 idling problem | nonothing | Technical Forum | 0 | 12-16-2002 04:56 PM |
Camry won’t start | TObject | Jeep Friends Forum | 5 | 01-08-2002 01:56 PM |