|
Technical Forum The main forum for jeep related discussions. Mechanically Inept... |
|
Thread Tools | Rate Thread | Display Modes |
#31
|
|||
|
|||
Less than $150.00 and pumps mucho air. Yea, not pretty or fancy like some set ups I've seen but works for me!! Pix at link below!
P.S. Stu, per usual good write up!! Jim My York
__________________
Jim Tucson CJ-5 I'm not young enough to know everything! |
#32
|
|||
|
|||
Is it a small building down across from k&h metals. if so thats where i have been going for along time. he has a larger pump than most around here. I also had them do a hydro test on one of mine and he restamped it for me. Really nice guy. There is a fire extingusher shop next door to me but they have this little pump and they can never get it past 3/4 full and still the same price.
|
#33
|
|||
|
|||
Thats him - his name is Rich. I guess we will see what the price is on the fill when I get the tank back. You aren't kidding about the pump size though
|
#34
|
|||
|
|||
Stu,
Great write-up as usual. I have been debating what type of OBA I wanted for some time now. I have considered engine driven yorks, electrics like the Quick Airs, and Powertanks. After much thought and research and the fact I like to tinker with my Jeep I decided on a York. Snagged a york off of a Volvo at a local junk yard and ordered the brackets and hardware from Kilby. I have seen all three types of OBA in action and they ALL have their advantages and disadvantages. It comes down to which one you like the most IMHO. I have noticed that many people are passionate about their opinions of OBA. Not sure why though. Oh well. Frank
__________________
2004 TJ, 4L, 5Spd, Big Daddy Rocker Guards, Teraflex long arm with 5" springs, 35" MTR's, 4.56 gears, Detroits f & r, SYE/CV drive shaft, Warn XD9000i, Durango 4x4 front bumper. |
#35
|
|||
|
|||
Quote:
Failing to understand that it does not matter how you think I should feel, but what really matters is how I actually feel. The inverse is also true in that sometimes you will find that folks will take very pointed actual experience and then tell you that it either did not happen that way, or you have no reason to be bothered if it was a negative experience or you have no reason to be happy if it was a positive experience. If you wish to see passion, try and convince me that my experiences don't count and I should ignore them.
__________________
I am Savvy. |
#36
|
|||
|
|||
it'll fit under the hood also but you gotta move the stock air cleaner
so far the tank hasnt been hit but i keep my eye on it. its a great compressor, im very pleased with its performance. |
#37
|
|||
|
|||
upnovr,
Which air manifold did you use? Is that one from Kilby or Powertank? (looks like the Powertank if I had to guess) |
#38
|
|||
|
|||
its the KE-AM6 manifold from kilby.
|
#39
|
|||
|
|||
for the record... I've hit mine but didn't puncture it. yet.
__________________
Brian |
#40
|
|||
|
|||
Stu, I've installed a couple of those Kilby manifolds. Decent little unit.
__________________
pooring money down the Jeep hole... |
#41
|
|||
|
|||
They would seem to be. If I new how to use a lathe, I would have finished the one I am waiting on.
|
#42
|
|||
|
|||
I have been running that compressor for over a year now, and it had been great...
It is REALLY tight under the hood of a V8 ZJ..
__________________
Fancy Grocery Getter.. |
#43
|
|||
|
|||
Quote:
I have a little experience with the York OBA system and the requirements for high volume needed for the AiROCK system. My York has been installed for more then four (4+) years now. The AiRock for 2.5 years. I just checked my maintenance records. They say I have added a total of 3 ounces of oil in the four (4+) years I have had it installed. I have never had to change to coalescing filter and have never had to drain the filter bowl either. Three (3) ounces of oil is minuet when you conceder the rather high demands of the AiROCK system, and usually airing up at least 5 or 6 Jeep's at the end of each days run. A tip for you if you install your own system Plumb the hot air from the York directly to your holding tank. Then take the air out of the tank to process and filter it. This helps the air cool down considerable and also condenses the little bit of oil in the air. It coats the inside of your steel tank and keeps it from rusting. All in all for my set-up I wouldn't use anything else, but to each their own based on their own needs. I do have an ARB compressor as well. It is cross plumbed into the York system. Should either have a problem all I do is throw two values under the hood and I am back in business. As for engine load? I suppose Robert has a point. When the clutch is engaged it certainly does add additional load, but eventually that load goes away when pressure reaches the appropriate point. Then again, now that I am supercharged (which I never really needed) I don't really care. Come to think of it, there is no room in my engine compartment. In truth it's hard to see the engine. But then again, there's no more room for hot air to build up either! Frank While some people swear by the added benefit of being able to run air tools with a York I have never had the need or desire to do so. Perhaps you may or may not yourself. |
#44
|
|||
|
|||
A question on the engine drag comment that I keep seeing. Are folks refering to drag of the clutch when the York is not engaged, or when it is engaged and running?
I'm not concerned about engine drag when the York is running, since I'm either at a standstill airing up (haven't worked out how to air up while on the move, it messes up my air hose when I try) and when the York occasionally comes on to fill my air-tank, it takes about 10 secs and I'm never in a situation where it would seem I need all the power my engine can provide. Anyone care to clarify? Thanks David |
#45
|
|||
|
|||
Quote:
Personnally, I feel that engine drag when the clutch is disengaged is not worth talking about. Probably less than when the alternator is working to recover for the headlights. Concur that engine drag when the compressor is running is not an issue since I'm stopped at that point and airing something up. At least for me that's how it works since I don't rely on the York to power my air lockers.
__________________
pooring money down the Jeep hole... |
#46
|
|||
|
|||
Quote:
|
#47
|
|||
|
|||
Quote:
|
#48
|
|||
|
|||
Quote:
I havent, yet, and drain an ounce or so outta my filter bowl after every other wheeling trip. IMO York OBA is similar to ARB lockers in that the install is EVERYTHING. Just say NO to Home Depot air line, barbed connectors and hose clamps! My OBA system would almost pass DOT compliance for a commercial air brake source MP
__________________
The trouble with common sense is it is no longer common |
#49
|
|||
|
|||
Well I can say that my use of barbed 3/8" hose connections and hose clamps holding quality air hose onto the fittings hasn't hurt anything in the five years they've been installed. In fact, my system is so airtight that it holds its load of air for literally months.
|
#50
|
|||
|
|||
Quote:
No I haven't done anything to address the oil consumption problem other then to start with a "re-manufactured" compressor from the start. I think it was $95. It supposedly came re-bored with new piston and ring and new reed valve body. I have never taken it apart to verify as I saw no need to. By design, the York should not be blowing oil from the sump to the outlets. Think about it. The outlet is normally used to flow Freon (spelling?) for A/C. Having the separate oil sump was to keep the oil separate from the Freon. I don't think folks in the 80's and early 90's, or the truckers who still currently use this unit on the big rigs feed it oil after a good trip down the road. I would thing oil consumption is an indicator that something is warn in the unit. I have several friend who have the oil consumption problem. Each has eliminated the problem by going to a remanufactured unit. (please note there are re-built units too, but I don't believe they are the same as remanufactured.) I also think there is something to be said about not restricting the air intake port to the York any more then is required to filter the air. I got this tip from Bard Kilby. While I haven't tested it myself, I do have my air intake coming from my engine air intake tube, downstream of the engine air filter using a 3/4-inch I.D. hose. I think your observation on reliability is correct it is all about the installation. I use only Hydraulic hoses with pre threaded ends. And like Jerry's mine will hold air for a very long time without bleeding down. The only problem I had was a leak on the gasket to the coalescing filter right after I installed it. Turned out I pinched the "o" ring and simply replaced it. I have seen the hose barbs work fine too. I just don't have any luck with them. I think my problem with them is I tighten the clamps down too tight in an effort to prevent leaks, which only causes them. I think I am worm clamp challenged. Have a great day, Frank |
#51
|
|||
|
|||
Well, well, well.....
What a York love fest we have going on here While I can understand why folks running the Airock suspension have a need, I guess I am wondering what the rest of you are doing. Do you all really carry around airtools, hose and whatnot? How often are you using that stuff on the trail if you do carry it with you? If you aren't carrying or using all that stuff, then the York sure seems like a complicated way to air up a few tires. I guess I have never found a need for air tools on the trail, or at least maybe I have been lucky enough not to have found a need for them yet. Heck, I don't even use my air tools in my garage all that often unless I'm in for a big job. Seems easier to grab the right socket and just get it done rather than fuss with hose and so forth. |
#52
|
|||
|
|||
Quote:
|
#53
|
|||
|
|||
Quote:
My blow gun has been used a couple of times to clean stuff. I've used it to clean my air filter after a very dirty run before heading home on the highway I also carry a die grinder. Besides the common uses, it also runs the air powered blender. At the end of the day there's nothing better than a slushy cold one. fruit smoothies for the kids. Margi's and Daquiris(sp) for those who wish to imbibe.
__________________
01 TJ sport |
#54
|
|||
|
|||
Quote:
__________________
pooring money down the Jeep hole... |
#55
|
|||
|
|||
Quote:
I'm gonna get me one of these and some glow fuel and tune it up a bit. http://www.blenderblaster.com/blenderblaster/
__________________
I am Savvy. |
#56
|
|||
|
|||
The bearing in my first blender did not like 20,000 RPM.
Keep forgetting to check yard sales for another. |
#57
|
|||
|
|||
I've seen it all, now
Quote:
Hole...E...Cow! I don't believe it. Never heard of such a thing. Yep, that's the cats-meow. The 4 cycle Honda powered GX25. Bet that dude has a blower attachment too boot!
__________________
pooring money down the Jeep hole... |
#58
|
|||
|
|||
I have no need for a blender on the trail but if it gives you folks a nice warm fuzzy feeling about why you have your York, then have at it. Hell, you could make a blender using a spare starter motor which could be used as a trail spare but I guess that might make to much sense.
|
#59
|
|||
|
|||
I have the air blender but only use it on the overnight trips
|
#60
|
|||
|
|||
You and your Matco Tool truck, er, I mean Scrambler don't count Kory You have alot more room and wheelbase in which to distribute weight.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OBA Recommendations | DC | Jeep Friends Forum | 16 | 08-30-2005 06:06 PM |
help, windows XP won't install | Scratch | Jeep Friends Forum | 18 | 01-17-2004 04:36 PM |
How To Install Tough Stuff Paint Protectors (Hellbender?s New Products) Large Thread | Daless2 | Jeep Friends Forum | 18 | 08-22-2003 08:25 PM |
Random Acts of OBA Kindness | Daless2 | Jeep Friends Forum | 4 | 05-29-2003 08:22 AM |
15 Minute Projects - OBA Finally Finished | Daless2 | Jeep Friends Forum | 1 | 11-01-2002 08:46 PM |