|
Technical Forum The main forum for jeep related discussions. Mechanically Inept... |
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Warn 5 on 4.5 for Danna 44
Ok Warn hub guru's, I'm getting ready to piece together the Warn 5 on 4.5 front hub conversion kit for my D44 front axle using Warn P/N 38007.
I currently have full cast rotors with the center machined out to 3.575" (+/-) 0.015". I also replaced my Moabs with Weld Super Single II's so the hub will have space to protrude through the wheel. I plan to purchase the inner axles from Superior using P/N PA6116 (left) and P/N PA6094 (right). I may add the Superior greasable axle seals (P/N EV33FSL) if the budget holds out. Since the fuse in the front driveline is now hopefully the Warn Hub, is Warn P/N 37781 the correct hub to order for the spare? The Warn kit comes with c-clips for the u-joints and I saw on Stu's site that mrblaine found a source for the full circle clips, can someone point me to the correct vendor and part number so I can order these as well? Is there anything I might have missed parts wise and/or is there anything I should pay careful attention to during the install? Thanks in advance. Ken |
#2
|
|||
|
|||
Re: Warn 5 on 4.5 for Danna 44
Quote:
I'm pretty sure you have the hub part number correct, it's best to buy them in pairs though.
__________________
I am Savvy. |
#3
|
|||
|
|||
Thanks mrblaine, I appreciate the response.
Ken |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Needed ASAP: Warn Inner Hub Seal (5 on 4.5) | blkTJ | Jeep Friends Forum | 2 | 06-13-2005 08:39 AM |
Warn 4.5 Hub Kit - Spares? | Scott_KY_98TJ | Technical Forum | 2 | 04-18-2005 08:12 PM |
Warn small hub kit (5 on 4.5 for TJ's) | StealthTJ | Jeep Friends Forum | 8 | 10-15-2003 07:53 PM |
warn hubs for 5 on 4.5 conversion | NAILER341 | Buy/Sell Jeep Stuff | 2 | 08-31-2003 10:52 AM |
Warn Hubs - 4.5 or 5.5 | ScottyY2K | Jeep Friends Forum | 9 | 03-14-2003 05:46 PM |