at my wits end

[rksp8]

One day I will open a general parts store that is actually helpful!!!

He is the deal... I need to replace the fitting on the front of my valve cover on a 91 Cherokee. It is the fitting that runs from the valve cover back to the air box. I also need to replace the rear one that controls the air in for the CCV. Here is where the problem lies. Out here in the sticks, if it does'nt have a PCV valve they think your dumb. Well accordint to what I have found, a PCV valve is not required on my model. I went to my local parts house and tried to explain to them what I needed in regards to the front fitting which is a one peice unit that inserts into the valve cover then hangs a hard 90. Well they had to order it, and I got a pop in grommet that accepts a PCV valve. Any help like the formal name of these peices or maybe part numbers would be great.

[Dukes69]

try this: http://www.off-road.com/jeep/cheroke...ltr/blowby.htm

[rksp8]

thanks

[Scott Hill]

Any barbed plastic fitting from home depot that is the right size should work.

Scott

[rksp8]

I spend enough time at Home Depot, that my wife says it is my home away from home Dont know why I didnt think of lookin for somethin there.

[Scott Hill]

I just remembered most auto parts stores sell a vacuum line fitting kit and the one I bought had 1 fitting that would go in a 82 4.2L vaulve cover. I think it cost about 2 buck for 20 different fittings.


Scott

[IronWagon]

Hopefully, something here can help:

http://www.madxj.com/MADXJ/technical...ValveCover.htm