Tiny Bubbles.... im my PS reservoir ?

[norcaljr]

Got everything hooked up, ram, Howe pump, reservoir, cooler and PSC box and everything seems to be running right. Bleeding the system was easy, but one thing I noticed is tiny bubbles in the fluid reservoir ??? They are about the size of a pin head and are comming up from the bottom of the reservoir.

Is this ok/normal ?

[mrblaine]

Originally posted by norcaljr
Got everything hooked up, ram, Howe pump, reservoir, cooler and PSC box and everything seems to be running right. Bleeding the system was easy, but one thing I noticed is tiny bubbles in the fluid reservoir ??? They are about the size of a pin head and are comming up from the bottom of the reservoir.

Is this ok/normal ?

Run it for a bit and see if it still does it.

[Dan-H]

when I rebuilt the saginaw pump on my 78 bronco I had bubbles after it was done..

I was advised to put the front on jackstands so the tires were off the ground and with the engine running, turn from lock to lock a bunch of times.

This successfully worked all the bubbles out of that system.

YMMV

- Dan