Trac bar modification

[Bryce W]

Seems like I remember someone modifying the rear adjustable Trac bar from Rubicon express and placing a heim joint in instead of the rubber bushing. What heim joint did you use? Where did you get it?

Bryce

[Bryce W]

just a bump

Bryce

[ausjeep]

I am also interested in this mod.
Plus the same deal with the front trackbar as well

[mrblaine]

I just used a standard 3/4-16 x 3/4" bore rod end and a tube adapter. Nothing special.

[Randall Edge]

any pics?

[Bryce W]

Basically you just add another rod end like the one that is on the right side of the picture, to replace the rubber bushing on the other end.
I went here rod end and here tube adapter for the parts. You also want to buy a jam nut which I also saw at the above site. I don't know what the inside dia. of the tube is. So before I order those parts I will make sure that the tube adapter will fit inside the trac bar. It also looks like Grainger and McMastercarr also have the parts. I'll take a few pics when I do mine.