|
Technical Forum The main forum for jeep related discussions. Mechanically Inept... |
|
Thread Tools | Rate Thread | Display Modes |
#31
|
|||
|
|||
I still have the complete stock front end I figure the tie rod was only a little bent so if I taco it I will swap it.
and Ron, you dont know how to drive you are even dumb enough to let me spot you over a really stupid line a little TJ with a few mods check her out at www.real-jeeps.com
__________________
a little TJ with a few mods |
#32
|
|||
|
|||
Just to add if I ever get a real Job again the next project is front hubs and new stearing stuff I can see mine is bent. but I like Ron have been lucky for some time and I know it cant last forever.
a little TJ with a few mods check her out at www.real-jeeps.com
__________________
a little TJ with a few mods |
#33
|
|||
|
|||
Ron,
Easy on the testosterone! I tried to explain to you that I was teasing... that’s what I do with my friends. Way back in January, you were asking all about the front locker... remember that? http://forums.jeepsunlimited.com/ubb...ML/004460.html I was there to help then, and now. I skipped a smiley face by accident, which made the post look mean. Not my intention. Seth Tightey Whitey World |
#34
|
|||
|
|||
It's funny scott, all the money from a real job and you don't break much. Suddden pay cut and they just pop out of the wood work.
R/ William Karstens
__________________
r/ William "Never sacrafice principal for temporary gain." |
#35
|
|||
|
|||
Oh and as for my jeep?
The short history of this Jeep (my 3rd). I bought the Sahara that I own now in march of 1998. It came with the 30/35, which I promptly swapped out that year for a built 30/ 44, 4.56 Detroit rear, EZ front. Hence 2 sets of axles, of which I have 3 years on the Detroit f/r. Since that time, my Jeep has 60k miles on it, and wheelin' trips to Rubicon (at least 22 by my count), Hells Revenge, Gold Bar, Golden Spike, Moab Rim, Hollister, Frank Raines, Ramsey, Anza Borrego Desert, and Corral Canyon. I've NEVER roasted a u-joint. These shafts are exactly the same set as were in the Jeep the DAY I bought it (yes, I kept the axles I had when I did the swap). And the tie rod? Its been an RE since the first lift. I am not a rich man and spend my money rather frugally. Note that most of the major upgrades I did were to second hand parts (Axles, T-case, etc) I drive for survival and will not abuse my equipment for the sake of amusement. Seth Tightey Whitey World |
#36
|
|||
|
|||
Well after reading all this stuff I went out to look at the Jeep and guess what......
The Drag link is what bent the tie rod go figure. I guess I need to hit the lottery or have one of the guys from Fridays interviews calls me. Any Chance someone has a drag link for a good price. I have one but I belive it is spoken for. side note Blaine was right again when I said I was having alignment problems he said it was a drag link problem I said looks fine to me. I guess I should have looked a little harder. a little TJ with a few mods check her out at www.real-jeeps.com
__________________
a little TJ with a few mods |
#37
|
|||
|
|||
<BLOCKQUOTE><font size="-1">quote:</font><HR>Originally posted by Seth:
I drive for survival and will not abuse my equipment for the sake of amusement. [/quote] But you sure did let William drive off in it! Now that made for good amusement.. mostly at my expense. R/ William Karstens
__________________
r/ William "Never sacrafice principal for temporary gain." |
#38
|
|||
|
|||
I sure am mean aren't I?
Met you for oh... 6 seconds and toss you my keys. Of course I did call you a bad driver! Tightey Whitey World |
#39
|
|||
|
|||
That's ok.. it just put you in a category with all the other folks around here that give me @#$@# bout stuff.
Just the other day a Jeeper I know (to remian anonononymous) told me to quit playing with a Hemiend, as it would fall out of the sleeve.. R/ William Karstens
__________________
r/ William "Never sacrafice principal for temporary gain." |
#40
|
|||
|
|||
I run 35's with a lock right and 3.73's behind a V-8 in my ZJ. Run it through the con twice, and I wheel about 3 weekends a month out here in boulder. Haven't had any problems, and this is through stock CV jointed axles.
-Nate 95 ZJ 35's locked |CU 4 Wheeling club |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
D30 Warn Hub kit & front brake pads? | FAM | Technical Forum | 2 | 06-27-2005 04:26 PM |
Looking for Warn D30 block-off plate kit... | edswinehart | Technical Forum | 5 | 12-16-2003 02:37 AM |
d30 Warn kit Questions | Kris | Jeep Friends Forum | 2 | 03-19-2003 07:16 PM |
Problems with my Warn small hub kit | silvertj | Technical Forum | 0 | 10-06-2002 01:02 PM |
Radio Dispatch from September 11 | TObject | Jeep Friends Forum | 2 | 10-31-2001 08:04 AM |