WJ on board...

AAMC · #1 01-04-2002, 04:19 AM

This board is refreshing. Just wanted to extend a thanks to Chris for freein' me from the bonds of JU. I look forward to contributing to this board.

I'm workin on a semi crazy WJ build up for right now. Hopefully everything will come to fruition before June.

PlatinumZJ · #2 01-04-2002, 04:32 AM

Hey Anton! Good to see you here. You better finish the build up by June because GSE is June 7-9. Stop posting messages and get to work

Jay

Chris L · #3 01-04-2002, 08:34 AM

Welcome Anton. What are the current mods your working on? You will find great technical advise here.

97 ZJ 8.0" lift, Armed and plated bus.

AAMC · #4 01-04-2002, 10:36 AM

Chris,
Waiting on the 8" springs from VS to arrive so that I can take measurements and order the rev cut 44 and 60 from Mike. Hopefully Clayt will have a long arm that I can work with by then to set everything up. The WJ is going into the body shop sometime soon to repair some minor damage, to hopefully tuck the gas tank up higher into the body, and to get some trimming done. I've also got to swap in my 242. I've been meaning to talk to you and other buddies about stuff, but the holidays were so busy, and I've been away from the boards.

P.S.-I'm doing all this so that when Jay (PlatinumZJ) goes down K2 this year at GSE, I'll be able to more effectively pull him from the tree at the bottom of the monstrous descent .

Anton Cabellon

'00 WJ, 7" lift
Specs and Mods
Midwest Jeepthing

BMRisko · #5 01-04-2002, 01:55 PM

Welcome Anton! It's good to have a fellow member of the Submarine Club among us.

'93 ZJ, V8, 5.5", 33" SSRs, ARB, etc.

PlatinumZJ · #6 01-04-2002, 01:56 PM

<BLOCKQUOTE>quote:<HR>
P.S.-I'm doing all this so that when Jay (PlatinumZJ) goes down K2 this year at GSE, I'll be able to more effectively pull him from the tree at the bottom of the monstrous descent .

[/quote]

Don't remind me. I really screwed that one up. I watched Bill Austin go down first and then found out after that he had a Klune V. I wondered why it looked so easy

Will probably join Clayton on advanced this year and climb some rocks instead. You're WJ will be more than capable to join us.

Jay

Handlebars · #7 01-07-2002, 10:48 AM

Hi Anton, from another bus driver.

97 2-door 5-speed XJ
"Yes, tow hooks are required!
Trail Crew SoCal 4x4 Club

mrblaine · #8 01-07-2002, 05:22 PM

<BLOCKQUOTE>quote:<HR>Originally posted by AAMC:
Chris,
Waiting on the 8" springs from VS to arrive so that I can take measurements and order the rev cut 44 and 60 from Mike. Hopefully Clayt will have a long arm that I can work with by then to set everything up. The WJ is going into the body shop sometime soon to repair some minor damage, to hopefully tuck the gas tank up higher into the body, and to get some trimming done. I've also got to swap in my 242. I've been meaning to talk to you and other buddies about stuff, but the holidays were so busy, and I've been away from the boards.

P.S.-I'm doing all this so that when Jay (PlatinumZJ) goes down K2 this year at GSE, I'll be able to more effectively pull him from the tree at the bottom of the monstrous descent .

Anton Cabellon

http://albums.photopoint.com/j/AlbumList?u=269764
http://midwestjeepthing.com/member/M....asp?rideid=71
http://www.midwestjeepthing.com
[/quote]

Those 8" springs from VS, would that be Varick Stringham?

You are just another ride in the amusement park of my mind.

papromike · #9 01-08-2002, 08:46 PM

No Blaine, VSW, actually...valley spring works...

Anton is one of the few guys out there in a nice 2001 WJ and is about to totally mod the hell out of it (moreso than before)

Welcome aboard Anton....

8" locked and armored "grocery getter":

norcaljr · #10 01-08-2002, 10:51 PM

we need some more Bus drivers here.. lol

Taking the kids to school in the bus.. LOL

AAMC · #11 01-09-2002, 04:29 AM

Blaine,
Who's Varick Stringham?

The California "bus drivers" have been particularly helpful with my plans. Thanks again.

Anton Cabellon

'00 WJ, 7" lift
Specs and Mods
Midwest Jeepthing

mrblaine · #12 01-09-2002, 06:06 AM

<BLOCKQUOTE>quote:<HR>Originally posted by AAMC:
Blaine,
Who's Varick Stringham?

The California "bus drivers" have been particularly helpful with my plans. Thanks again.

Anton Cabellon

http://albums.photopoint.com/j/AlbumList?u=269764
http://midwestjeepthing.com/member/M....asp?rideid=71
http://www.midwestjeepthing.com
[/quote]

Varick Stringham = the owner of RockKrawler Suspension. He is doing a lot of stuff with Grands and Cherokees.

You are just another ride in the amusement park of my mind.

Joe Dillard · #13 01-10-2002, 08:29 AM

Welcome aboard AAMC!

Rock Hill, MO! Hmmm, my Dad's in St James (near Rolla). You can't be all bad.

AAMC · #14 01-10-2002, 10:13 AM

Ah, the other VS! A topic of controversy on the "other" board.

Thanks for the welcomes!

Anton Cabellon

'00 WJ, 7" lift
Specs and Mods
Midwest Jeepthing

Z-what? · #15 01-10-2002, 05:26 PM

I'm a little late in the welcome, but welcome aboard Anton. Can't wait to see how the WJ turns out at GSE.

94 bus 6.5" lift
"give it some stick"

Texas ZJ1 · #16 01-11-2002, 09:42 AM

Hey Anton,

good to hear from you.

Hunter

94 V8 Red Grand Cherokee, RE lift, mud tires and more.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Get some Co2 equipment and help the board	mrblaine	Technical Forum	15	07-16-2003 10:06 PM
WOW 16 guests on the board!	Joe Dillard	Jeep Friends Forum	2	03-04-2003 09:51 AM
Use radiator auto cooler for on board air?	TJRON	Jeep Friends Forum	3	01-25-2003 05:04 PM
On Board Fluid (OBF) System - Complete	Daless2	Jeep Friends Forum	10	12-31-2001 05:54 PM
On Board Fluids (OBF) System - Your Design Assistance Please!	Daless2	Jeep Friends Forum	2	12-17-2001 09:04 AM