|
Buy/Sell Jeep Stuff Anything legal you want to purchase or get rid off, let fellow jeepers know about it here |
|
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
HP D30 w/ 4.56s, also WJ knuckles, rotors and unit bearings.....
I have the following up for sale as parts or whole:
High Pinion D30 with 4.56s from a '96 XJ. This is a BARE housing, no shafts, no brakes, no bearings. Does include knuckles $250 297/760 shafts, 2-stubs, 1-inner, 1-outer. The shafts are assembled with u-joints, but they're worn out. I will remove the u-joints at your request. $100 WJ knuckles off of a 2000 WJ, both sides. $100 WJ Unit bearings also off a 2000 WJ w/ approximately 33k miles. $100 for both. WJ rotors, plenty of meat left, I don't think they've ever been turned. $30 a piece, $50 for both Short side WJ CV shaft, $40 For the HP 30, shafts, and WJ knuckles I'll let it all go for $375. I need to move this stuff ASAP as my previous buyer for most of it backed out and I already shelled out for a new axle. These are ready to be picked up, they're sitting in the back of my Jeep. Note: One of the LCA mounts on the HP30 is bent to the point that it needs to be replaced. It got a little tweaked and I tried to beat it into shape and ended up FUBARing it. I have a replacement LCA mount from Rusty's and will throw that in along with the necessary cam bolt. I will ship if so desired, but buyer pays shipping. MAKE OFFERS on this stuff I need it gone. Thanks Ary
__________________
2001 XJ w/ stuff |
#2
|
|||
|
|||
Do you have any of the other WJ brake parts or just the rotors?
Chris |
#3
|
|||
|
|||
I have the calipers too, but I was planning to hold onto them, but at this point, make me an offer and I'll consider it. I don't have a clue as to what they go for, but I'll check around. Thanks
Ary
__________________
2001 XJ w/ stuff |
#4
|
|||
|
|||
OK, let me know on the calipers. I am probably interested.
Chris |
#5
|
|||
|
|||
Quote:
__________________
2001 XJ w/ stuff |
#6
|
|||
|
|||
Right now I can only afford $50 for the pair
|
#7
|
|||
|
|||
Quote:
Ary
__________________
2001 XJ w/ stuff |
#8
|
|||
|
|||
You want to sell just the gears?
__________________
'01 TJ Sport, lottsa stuff! |
#9
|
|||
|
|||
I can use the knuckels do you still have them.
Scott
__________________
a little TJ with a few mods |
#10
|
|||
|
|||
sorry to post such n00b questions, but I'm interested...
How much do the bearings run for? Or if someone has a p/n I'll search for it myself (I'll see what I can find on my own). TJ D30 brakes & shafts should swap right over, correct? Thanks. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Brake rotors, unit bearings | Kiwi | Technical Forum | 4 | 02-22-2007 09:25 AM |