guys with swayloks... need some measurements

[papromike]

Could anyone give me a few measurements on their swayloks??

I need to know

#1 total Arm length

#2 distance from centerline of tube to the outboard measurement of the solenoid

[Stu Olson]

My solenoid is located in the engine compartment. I assume you mean the actuator?

I would get the numbers for you but the TJ is 50+ miles from where I am typing.

[papromike]

Uh, that is what I mean..
thanks STU

[Stu Olson]

In case I get home before anyone provides an answer for you, what is the outboard measurement of the actuator?

The end of the plunger, the end of the air cylinder itself? Let me know.

[Daless2]

Originally posted by papromike
Could anyone give me a few measurements on their swayloks??

I need to know

#1 total Arm length

#2 distance from centerline of tube to the outboard measurement of the solenoid

#1 Total Arm Length = 16-inches (Center line to Tip of Arm

#2 center line to near end of air cylinder = 1.5-inches
or
Center line to far end of air cylinder = 6.0-inches

Hope this helps

Frank

[papromike]

Frank, that is perfect...



Steve is doing up a custom one for my Grand cherokee and I needed him to shorten the arms slightly...

[norcaljr]

Originally posted by papromike
Frank, that is perfect...



Steve is doing up a custom one for my Grand cherokee and I needed him to shorten the arms slightly...

I have been wanting a swayloc for awhile now. Any chance you could PM the measurements your having steve build out for you

[mrblaine]

Originally posted by norcaljr
I have been wanting a swayloc for awhile now. Any chance you could PM the measurements your having steve build out for you

Knowing Steve, there's a good chance that once they are figured out for the Mike, it will soon be a product for ZJ's.

[norcaljr]

Originally posted by mrblaine
Knowing Steve, there's a good chance that once they are figured out for the Mike, it will soon be a product for ZJ's.